BRPTG - QUIK-COTE FINISHING CEMENT
- MSDS: BRPTG
- Manufacturer: PK INSULATION MFG CO INC
- Product Name: QUIK-COTE FINISHING CEMENT
- National Stock Number: 8040-00N042097
Product Identification
Product ID:QUIK-COTE FINISHING CEMENT
MSDS Date:02/14/1990
FSC:8040
NIIN:00N042097
MSDS Number: BRPTG
Responsible Party
JOPLIN, MO 64804
US
Emergency Phone: 417-781-6380
Info Phone: 417-781-6380
Cage: 3P006
Contractor
Telephone: 417-781-6380
Cage: 3P006
Ingredients
MINERAL WOOL FIBER
RTECS: PY8070000
OSHA PEL N/K
ACGIH TLV: 10MG/M3 TDUST,5RDUST
SILICATE, PORTLAND CEMENT; (PORTLAND CEMENT)
CAS: 65997-15-1
RTECS: VV8770000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
10 MG/M3 TDUST,
CAS: 1302-78-9
RTECS: CT9450000
OSHA PEL N/K
ACGIH TLV: SEE INGREDIENT
CALCIUM CARBONATE
CAS: 1317-65-3
RTECS: EV9580000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
NITROUS ACID, SODIUM SALT; (RUST INHIBITOR (COMPOUNDS OF
CAS: 7632-00-0
RTECS: RA1225000
OSHA PEL N/K
ACGIH TLV: 10MG/M3 TDUST,5RDUST
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: MINERAL WOOL FIBER AND NUISANCE
DUST MAY CAUSE TRANSITORY MECHANICAL IRRITATION TO EYES, SKIN OR
UPPER RESPIRATORY TRACT. CHRONIC: PROLONGED INHALATION OF MINERAL
DUST MAY REDUCE LUNG FUNCTION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES:FLUSH W/WATER FOR AT LEAST 15 MINUTES. DO NOT RUB. IF
IRRIT CONTINUES CONSULT MD. SKIN:WASH PARTICLES FROM SKIN W/SOAP &
WATER. DO NOT RUB. INHAL:REMOVE TO FRESH AIR. INGEST:CONSULT MD.
Fire Fighting
Flash Point:NON-COMBUSTIBLE
Extinguishing Media:MATLS COMPATIBLE W/CARBON DIOXIDE, WATER OR DRY
CHEMICAL EXTINGUISHING MEDIA.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:EXPLOSION POTENTIAL: NONE.
Accidental Release
Spill Release Procedures:AVOID CREATING DUST. USE VACUUM OR WET
CLEAN-UP TO MINIMIZE AIRBORNE DUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED DUST RESPIRATOR.
Ventilation:LOCAL EXHAUST OR MECHANICAL VENTILATION TO KEEP BELOW TLV.
Protective Gloves:GLOVES IF DUST IS IRRITATING.
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:WEAR LONG SLEEVED, LOOSE FITTING CLTHG CLSD
AT NECK & MINIMIZE SKIN EXPOS. WASH WORK CLOTHES SEPARATE FROM
OTHER CLTHG.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:NOT KNOWN
Decomp Temp:Decomp Text:NOT KNOWN
Vapor Pres:NOT KNOWN
Vapor Density:NOT KNOWN
Spec Gravity:NOT KNOWN
Evaporation Rate & Reference:NOT KNOWN
Appearance and Odor:DRY, GRANULAR MIXTURE. NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE.
Disposal
Waste Disposal Methods:INERT SOLID WASTE. TO LANDFILL IN ACCORDANCE
WITH LOCAL, STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.